SPECIFICATION
SilverStone GEMINI
GM500-G
Mini Redundant Switching Power Supply
80 PLUS Gold
PMBus 1.2
500W+500W
01
This is the specification of Model GM500-G; it is intended to describe the functions and performance of the mini
redundant power supply. The GM500-G 500 watts mini redundant power supply is featured with Active PFC
(Power Factor Correction) capability and gold efficiency for 80+ and PMBus function meets IEC61000-3-2 and
equips full range Input features.
The power supply must meets inrush requirements of any rated AC voltage, during turn on at any phase of
voltage, during a single cycle AC dropout condition, during repetitive On/Off cycling of AC, and over the specified
temperature range. The peak inrush current shall be 30/60A @ 115/230 VAC (25
℃
) per module when cold start
and less than the rating of its critical components (including input fuse, bulk rectifiers, and surge limiting device).
The power supply must operate within all specified limits over the input voltage range in Table 1.Harmonics
distortion of up to 10% THD must not cause the power supply to go out of specified limits.
Base on the minimum voltage and power transfer, the max current calculation as below:
Table 1 – AC Input Voltage and Frequency
Max Current
≧
(Watt / Efficiency) / Minimum Voltage
2.2 AC inrush current
2.1 AC input voltage, frequency and current (Rating: 100V-240 VAC, 47-63Hz, 8-4A)
1. General
2. AC input specifications
Parameter
Voltage (115V)
Voltage (230V)
Frequency
Minimum
90 VAC
180 VAC
47 Hz
Normal
100-120 VAC
200-240 VAC
50 / 60 Hz
Maximum
132 VAC
264 VAC
63 Hz
Max. Current
8A
4A
N/A
Summary of Contents for Gemini GM500-G
Page 15: ...NO G11223830...