Case Storage Series
CS01-HS
4
Installation Chart
have all components collected
check that all components do not have compatibility problems with each other or with the case
if possible, assemble the components outside the case first to make sure they are working
keep the motherboard manual ready for reference during installation
prepare a Philips screwdriver.
1
2
3
4
5
Before you begin, please make sure that you
01
Lösen Sie die beiden Schrauben an beiden Seitenblenden und entfernen Sie sie in der abgebildeten Ausrichtung.
Quite dos tornillos de cada uno de los paneles laterales para retirarlos en la dirección que se muestra.
Svitare due viti da entrambi i pannelli laterali per rimuoverli nella direzione mostrata.
Unscrew two screws each from both side panels to remove them in the direction as shown.
Чтобы
снять
боковые
панели
,
отверните
по
два
винта
с
каждой
стороны
панелей
.
取下左右側板各兩顆螺絲，依箭頭方向卸下側板。
取下左右侧板各两颗螺丝，依箭头方向卸下侧板。
양 측면 패널에서 각각 2개의 나사를 풀어 그림과 같은 방향으로 이들을 분리합니다.
パネルの両サイドから各2本のネジを外し、図に示される方向に取り外します。
Desserrez deux vis des deux panneaux latéraux pour les retirer dans le sens indiqué.