8
USE OF PRODUCT
Fig. 28
1.
In turned off state the appliance digital screen is in standby mode and a dot
is displayed. If any button is pressed, “L” (lock) flashes three times on the
digital screen.
2.
Then keep the timer button pressed until is displayed on the digital screen
3.
After the fan is unlocked, you can use “+/-” button to adjust the operation
You can change the fan power level by using the control unit or remote con-
trol and adjust as you like.
In order to turn the fan off, press button until “0” is displayed.
If the appliance is left idle for 10 minutes, it will switch to standby mode and
will be locked.
4.
As the appliance is being operated at any level, pressing button will
enable the 15 minute timer. As the timer counts back, the speed rate on the
digital screen will flash. After 15 minutes, any function that is enabled before
the timer will be turned off.(Fig. 28/5).
As the delayed automatic turning off is enabled, the speed rate on the digital
screen will flash.
5.
When is displayed on the digital screen, the metal oil filter shall be
cleaned . In order to delete the clean the filter message, follow the below
SH
is displayed
press “-”
press the timer button (Figure 10/2). • Metal oil filter
clean message is deleted.
When the product is switched to max-
imum speed while it is operated, a ( )
symbol shall be displayed on the
screen. 'b' symbol indicates that
boost (boost ventilation) mode is active
on the model. Product shall operate for
7 minutes in this mode and ‘b’ symbol
shall flash on the screen during this
period. After 7 minutes, product shall
automatically switch down one speed
level and shall resume operation in the
lower speed level.
USE OF PRODUCT
05.09.2019
SUPREME User’s and Installation Manual
25