13
Replacement of GU10 light source
WARNING!
Disconnect the hood's power supply. Let the lamps
cool down first as they will be able to burn your
hands when hot.
The icon indicates the maximum permissible wattage of the light
source. The product must therefore be used with 2 x max 50w
GU10 light sources
To find out how many watts of power the product's
light sources are on, this can be found inside the
product on the serial number label.
To remove the light sources, the grease filters on the hood must be
removed first. Then gently press the socket from behind and down,
and at the same time grasp the bulb and turn it counterclockwise to
release them (Fig. 19).
max 50 W
Fig. 19: Fig 25: Replacement of GU10
Light Source
Replacement of GU10 light source
24.07.2020
27
Summary of Contents for SCV 1160-50 HV HERMOD
Page 5: ...2 Technical drawing 500 500 81 121 460 114 100 Fig 2 Technical drawing 24 07 2020 5...
Page 6: ...500 700 81 121 660 114 100 Fig 3 Technical drawing 24 07 2020 6...
Page 19: ...F g 14 Adjustment of a r flow 24 07 2020 19 Balanc ng d agram for forced vent lat on...
Page 21: ...F g 16 Adjustment of a r flow 24 07 2020 21 D mens on ng d agram for forced vent lat on...