SILVER LINE S550
0
PRePaRation foR eXPloitation
In order to set the boat in operation condition perform as follows:
-
unfold the inflatable tube;
-
mount outboard engine on the transom in ccordance
with it`s own installation instruction.
-
extend engine remote control cables and steering
cable from engine mounting place to steering console mounting
place through holes on the deck and helm stowage.
SteeRing ConSole inStallation
In order to install the steering console, perform the next operations
( Fig. 2, Fig. 5 ):
-hinge out the steering console overhead;
-open the front seating;
-open hatch of the console back locker;
-extend steering cable and engine remote control cables
through hole in the steering console bottom;
-align console bottom holes with holes in the deck
surfaces and fix console to deck by means of bolts M8x30, serrated
lock washers and washers from complete set;
-attach steering cable to the steering mechanism and install
engine remote control block to the overhead console;
-connect electric cable to the steering console (see wiring
diagram);
- double-check that the steering and remote control cables
have been connected correctly. For checking refer to the steering
mechanism and engine instructions manual;
-fix the overhead console part by means of washers, serrated
lock washers and nuts;
-close front seating and hatch of the locker.
ATTENTION ! To avoid water penetration into the console inner
layers, please, tight all hole free space with any water resistant
filler.
Fig. 2
