Comfort Heating
garden
System
®
EN
Digital timer
Touch buttons with LEDs
Energy efficient
-Heating rod and
reflector with unique properties.
98% of the energy consumed is
converted to effective heat radiation.
IPX4
- Rainproof technology for
outdoor use.
Tested and proven
- Developed
and tested for optimal functionality.
Trust
- Increased safety with tipping
protection: the heaters switch off if
they get knocked over. They also
have a heat-protective surface that
does not get hot enough to burn.
Safety certification in accordance
with current CE, GS, RoHS and IPX4
standards.
Silverline C-Wave
™
- Warms your
skin and is gentle and healthy. It
stimulates blood circulation in the
muscles, and at the same time
avoids drying out the skin.
Optimal area coverage
- Two
power settings 600 W and 1200 W
provide optimised area coverage
and energy consumption.
FollowMe
™
- Heat the place where
you want to be – indoors as well as
out.
QuickStart
™
- A gentle heat can be
felt immediately.
How do you use Comfort Heater 1200 Digital IPX4
™
?
Connect the Comfort Heater to an earthed wall socket and
switch it on using the main power switch on the back. Start it up using the Power touch button, or the ON/OFF button
on the remote control. The Comfort Heater will start up at 600 W.
How do you control Comfort Heater 1200 Digital IPX4
™
?
With the accompanying remote control or by means of
the touch buttons. Switch between 600 W and 1200 W using the “H/L” touch button or the “LOW/HIGH” button on the
remote control. For oscillating motion press “TURN”.
How does the timer function work?
Press “TIME/TIMER” and the display will show the number of hours set until the
Comfort Heater switches off. Maximum timer setting is 6 hours.
How do you switch Comfort Heater 1200 Digital IPX4
™
off?
Both the ON/OFF button on the remote control and the
touch button put it into standby mode. Always switch the Comfort Heater off using the main power switch on the back
if it is not going to be used for a while.
Where should Comfort Heater 1200 Digital IPX4
™
be positioned?
The Comfort Heater should be standing on
its base. Position it so that the heat radiates towards the location where you want heat. Remember not to place the
Comfort Heater next to flammable materials. Never direct the Comfort Heater towards a wall.
How does Comfort Heater 1200 Digital IPX4
™
work?
The Comfort Heater has a carbon-fibre heating rod that emits
infrared waves of heat of a longer wavelength than conventional infrared heaters that use metal heating rods. This
longer wavelength warms the skin without drying it out.
How large an area does Comfort Heater 1200 Digital IPX4
™
cover?
As the Comfort Heater can employ an
oscillating motion, it covers around 14 m
2
.
Where can you use Comfort Heater 1200 Digital IPX4
™
?
FollowMe
™
– outdoors on the patio, on the balcony or on
the veranda. Also indoors, for heating the place where you are instead of heating the whole house.
Does Comfort Heater 1200 Digital IPX4
™
heat along the floor?
Yes, as it stands vertically on a base, it also heats
along the floor.
Can Comfort Heater 1200 Digital IPX4
™
withstand rain?
Yes. Protection class IPX4 means that it can cope with
being outside in drizzle and still function safely without any problem.
Does Comfort Heater 1200 Digital IPX4
™
consume a lot of energy?
If you have the Comfort Heater switched on at
the 1200 W setting for one hour, it only consumes 1.2 kWh. At setting 600 W only 0.6 kWh.
How long does the carbon-fibre rod last?
Around 3,000 hours.
How long does the guarantee last?
2 years.
