GB
8
Problem
Possible cause
Solution
No power
Mains circuit breaker operated or fuse blown
Check circuit is capable of required current then reset mains circuit
Internal fuse blown
Have fuse replaced by a qualified electrician
During use the welder stops
working
Duty cycle exceeded and Over-Heat Indicator (7) is
illuminated
Leave the welder for 20-30 minutes to cool down
Poor weld
Incorrect current setting
Adjust Current Knob (4)
Wrong electrode rod/stick
Replace electrode rod/stick
Poor earth connection on workpiece
Check Earth Clamp (6). Ensure there is no grease, paint or other surface coating
that would cause a bad electrical connection with the workpiece
Troubleshooting
466888_Manual.indd 8
14/02/2017 12:46
