ASSEMBLY
• Ensure the mains plug is disconnected.
• Undo clasps.
• Lift off top section.
• Remove contents from inside the container.
• Turn the container upside down and insert the two feet castors
on the front and two feet with large wheels at the rear of the tank.
Ensuring the are mounted correctly push all the way in. Screw
them in until tight
• For wet vacuum cleaning fit the supplied foam filter.
• For dry vacuum cleaning fit the supplied cartridge filter.
• Or for dry vacuum cleaning fit the optional dust bag.
• Replace the top section onto the container.
• Align the top section with the clasps and snap into place, by
applying pressure at the mid point of the clasp.
• Insert the large end of the hose into the front inlet of the container
and screw on it until tight.
• Choose the desired nozzle/extension tube(s) and push onto the
suction tube.
OPERATING INSTRUCTIONS
Switching on/off
• Connect the mains plug.
• To switch on the vacuum cleaner: select position l on switch A
• To switch on electrical app vacuum cleaner: select position
l and '=' on switch A & C
• Only connect electrical appliance with a maximum power
rating of 1000W
NOTE:
Switching on the electrical appliance automatically switches
on the vacuum cleaner. Once the electrical appliance has been
switched off, the vacuum cleaner switches off following a time laps.
• Switching off the vacuum cleaner: Press O
Dry vacuum cleaning
• Ensure the machine is unplugged from the power supply.
• Check your vacuum is ready for dry vacuuming.
• Place the reusable filter over the basket filter and center.
• Push down until mounting ring of reusable filter is positioned
against ribs of the top section.
• Be sure the reusable filter completely covers the filter basket.
• Check to ensure that all the edges of the reusable filter are
secure under the mounting ring.
• Push the dust bag flange onto the inlet stub, take care not to
damage the bag.
• Reposition the head onto the drum body and clip in place.
• Insert the larger end of the flexible hose into the front inlet on the
container and lock into place.
• Push the required attachment onto the free end of the hose.
• Plug in the power supply.
• Switch the motor on (Position I )
• When you have completed vacuuming, press the switch to off
(position 0), and unplug from the power supply.
NOTE:
Check the units dust bag regularly and safely dispose of
contents when
2
/
3
full. The bag is manufactured so that only air not
dust will pass through the paper, and as such the dust bag must not
be reused.
NOTE:
Do not use the dust bag for wet or sharp materials.
A: Function switch
B: Outlet socket
C: on/off Switch
675260_Instructions.indd 3
30/3/07 11:15:32
