Silvercrest WE-2300, User Manual And Service Information

Page: 20 / 130

Multi-Band Tuner WE-2300
English - 17
Setting the Alarm Clock
Make sure that the clock has been set correctly (see the page
15 - Setting the Time). The alarm time can only be set while the
device is powered off. If it is still powered on, press the On/Off
button [7] to power the device off.

Press and hold the AL.SET button [11]. The indication
“ALARM” [27] starts blinking on the display.

Then press the HOUR button [4] repeatedly to set the hours
of the alarm time. You can also keep the HOUR button [4]
pressed down to accelerate the digit adjustment. To
distinguish ante meridian (morning) and post meridian
(afternoon) time for the 12-hour display, "PM" [24] will
display for post meridian clock hours.

Keep the AL.SET button [11] pressed. Then press the MIN
button [12] repeatedly to set the minutes of the alarm time.
You can also keep the MIN button [12] pressed down to
accelerate the digit adjustment.

Release the AL.SET button [11] after the alarm clock has
been set correctly.