Silvercrest swv 733 a1, User Manual And Service Information

Page: 270 / 328

SilverCrest SWV 733 A1
268 - English
It is possible to configure multiple dual-band wifi range extenders. These should be
configured one after the other.
If your wireless router does not support WPS or the connection fails for some other reason, you must
manually configure the dual-band wifi range extender.
Manual configuration
There are two different ways to configure the dual-band wifi range extender.
If you are not using the network default settings on your computer and have
manually set an IP address, you must restore the network settings to Automatically
obtain an IP address. For further details, please read the operating instructions
for your computer.
1. You can then configure the dual-band wifi range extender via the network cable. If you want to
configure the dual-band wifi range extender via the network cable, you must connect the dual-band
wifi range extender to your computer. Use the network cable included with the device for this
purpose. Insert one end of the network cable into the WAN/LAN socket (6) or the LAN socket (7)
of the dual-band wifi range extender and the other end into the LAN socket of your computer.