SilverCrest SWKH 3100 A1
34 - English
8.3 Storing the device when not in use
If the kettle will not be used for a longer period of time, store it in a clean and dry place.
•
Let the kettle (8) cool down fully before you store it.
•
Wrap the power cable (6) around the cable rewind under the base (7) and store the kettle in a
safe, dust-free place.
9. Troubleshooting
If your kettle does not work as usual, use the following instructions to try and solve the problem. If
working through the following tips does not eliminate the fault, please contact our hotline (see the
‘Warranty information’ section).
The kettle is not working
•
The plug is not inserted. Insert the plug into the power socket.
•
The power socket is faulty. Try the device in another power socket that definitely works.
•
The kettle (8) is not switched on. Press the ON/OFF switch (5) down in order to switch on the
kettle (8).
•
The kettle (8) has overheated and the overheating protection is preventing the device from
switching on. Wait until the kettle (8) has cooled down completely. Fill the kettle (8) with at
least 0.5 litres of drinking water up to ‘0.5 l MIN’ mark.
The ON/OFF switch (5) does not engage when switched on
•
The kettle (8) is not properly placed on the base (7). Place the kettle (8) properly onto the
base (7).
10. Environmental and waste disposal information
Devices marked with this symbol are subject to the European Union Directive
2012/19/EU. Electrical and electronic devices may not be put in the household
waste, but must be disposed of via designated public disposal centres. By
properly disposing of the old device, you can avoid environmental damage and
hazards to health. Further information regarding proper disposal of the old device
can be obtained from your local authority or the shop where you purchased the
device.
