21
GB/IE
If you notice any smoke or
unusual noises, immediately
disconnect the product from the
power supply . Have the product
checked by a specialist before
continued use .
m
WARNING!
Do not use
the product if the water kettle
shows cracks or other signs of
damages .
Placing the product
The product must not be placed
directly below a power supply .
Always use the product on a
flat, stable, clean, heat-resistant
and dry surface .
Operation
The product shall only be used
with the supplied base .
Do not overfill the product . If
the product is overfilled, boiling
water may be ejected . Do not
operate the product without
water . The fill level of the
product must be between the
MIN
and
MAX
marks on the
water gauge .
Cleaning and storage
The product shall not be
exposed to any dripping or
splashing water .
Disconnect the product from the
power supply before cleaning
and when not in use .
Refer to the “Cleaning and
care” section for instructions on
how to clean the product .
Before first use
Remove all the packaging materials .
Clean the product (see “Cleaning and care”) .
Boil the maximum water volume of 1 .7 litres
(see „Operation“) . After boiling, discard the
water to remove any production and transport
residues .
Summary of Contents for SWGF 3000 B2
Page 3: ...13 1 2 3 4 5 6 8 9 10 11 7 12 A ...
Page 4: ...3 13 1 B C ...
Page 5: ...13 1 13 1 D E ...
