SilverCrest SWDR 500 B1
32 - English
In the following we describe the setting for AL1. You can program AL2 in the
same way. If during the setting procedure no button is pressed for approx. 8
seconds, the settings are applied and the setting mode is quit.
Press the "M-/AL1" button (14) for approx. 1 second. The hours flash on the
display (6).
Press the "VOL-" (12) or "VOL+" (4) buttons to set the desired hour of the
alarm time. You can keep the buttons pressed to accelerate the digits count.
Press the "M-/AL1" button (14) briefly to apply the setting. The minutes flash
on the display (6).
Press the "VOL-" (12) or "VOL+" (4) buttons to set the desired minutes of the
alarm time. You can keep the buttons pressed to accelerate the digits count.
Press the "M-/AL1" button (14) briefly to apply the setting.
Now you can press the "VOL-" (12) or "VOL+" (4) button to select if you
want to wake-up with the buzzer ("bUZZ") or the radio ("rdA"). Press the "M-
/AL1" button (14) to confirm your selection.
Now you can press the "VOL-" (12) or "VOL+" (4) buttons to set the desired
alarm volume. Press the "M-/AL1" button (14) briefly to apply the setting.
Finally you can select the days of the week for which you want enable the
set alarm. Press the "VOL-" (12) and "VOL +" (4) buttons to toggle between
the following options:
Individual days of the week
Days of the week from Monday to Friday
Weekend Saturday and Sunday
All days of the week
Press the "M-/AL1" button (14) briefly to apply the setting.
You have finished setting the alarm time.
