6
4.4 Protection against injury
Warning!
To avoid injury, please
observe the following information.
• Ensure that it is not possible for anyone
to trip over or to get caught up in or step
on the mainscable.
4.5 For the safety of your child
Warning!
Children often cannot
assess dangers correctly and are
injured as a result. Please therefore
observe the following:
• This product may only be used under
adult supervision to ensure that children
do not play with the appliance.
• Always take care to ensure the
appliance is kept out of the reach of
children at all times.
• Ensure that the packing foil does not
become a deadly trap for a child.
Packing foils are not toys.
5. Unpack and set up
5.1 Assemble appliance
Before the appliance can be started up,
stand
8
needs to be screwed on.
1. Take the appliance out of the
packaging.
2. Remove the transport packaging.
3. Check that the appliance has not
sustained any damage.
4. Put rear half of the stand
10
and front
half of the stand
11
together.
Note
You can recognize rear half of the
stand
10
by the depression for power
supply cable
9
.
5. Use screw ring
12
supplied to screw
stand
8
to the underside of the tower
fan.
Notes
– On delivery, screw ring
12
is screwed
onto the bottom of the tower fan.
– Ensure that power supply cable
9
is
located in the depression provided for it.
– Tighten screw ring
12
hand-tight. Do
not use a tool.
6. Select a location in line with the safety
instructions (see “4. Safety instructions”
on page 4).
7. Plug the power plug into a power supply
socket which meets the technical data
requirements.
RP96066 Tower-Ventilator LB4 Seite 6 Donnerstag, 10. Oktober 2013 11:00 11
