GB
10
STS 12 B2
♦
Align the light surface
so that the flicker is visible on
the walls and/or ceiling.
♦
Connect the power adapter
with the appliance by
inserting the barrel connector
into the plug socket
at the rear side of the appliance. If required, route
the power cable through the cable conduit
on the
appliance.
♦
Connect the power adapter
into a power socket.
NOTE
►
It is best to check the location and alignment of the
appliance in the dark from outdoors and through the
window. Only in this way can you assess whether the
appliance is aligned so that it appears as if someone
is watching television inside.
If necessary, realign the appliance.
Wall mounting
RISK OF ELECTRIC SHOCK!
Ensure that there are no power cables or other
conduits or pipes in the wall at the location where
you intend to bore the holes for the wall holder. It
would be a potentially fatal risk to bore into a current
carrying electric cable!
Select a suitable mounting location for the appliance:
―
The TV Simulator may not be directly visible from
outdoors.
―
The flickering generated by the TV simulator must be
visible on the walls and/or ceiling from outdoors.
―
A power socket must be easily accessible.
―
The TV Simulator must be installed such that it can
be influenced by the twilight. This means that it must
be able to detect light from outside!
Summary of Contents for STS 12 B2
Page 3: ......
