Silvercrest SSR 576 A1, User Manual And Service Information

Page: 139 / 151

Digital SD Sat Receiver SSR 576 A1
English - 25
Factory Defaults
This function lets you restore the factory default
settings of your device.
Warning: This will erase all values that have
been modified after the first-time setup. Only the
custom channel and favourite lists will not be
changed.
To execute this command, press the OK button
(40) and then SWAP (37) to confirm. Press the
EXIT button (39) to cancel erasing.
Extras
System Info
Shows information about the software version of
your satellite receiver. You will need this
information when contacting Technical Support.
Signal Strength
The signal strength indicator shows the total
input signal strength. The C/N value displays the
signal quality. The signal quality is decisive for
achieving interference-free reception. Orientate
your antenna so that the Signal Strength and
Signal Quality reach their maximum.
You can press the INFO button (31) to enlarge
the C/N value display.
DiSEqC Motor
When using a motor-driven antenna system, you
can execute the corresponding command for
your antenna motor. First select a position from
1 to 255 (0 is the motor-dependent reference
position). Then select "Execute motor
command". Now you can execute the motor
command with the following buttons:
- (29) Move the antenna to the East.
+ (41) Move the antenna to the West.
OK (40) Stop motor.
1 Move the motor to stored position.
2 Save the current motor position for
the value set in the "Position" field.
3 Set the current position as East
limit.