Silvercrest SSR 576 A1, User Manual And Service Information

Page: 124 / 151

Digital SD Sat Receiver SSR 576 A1
English - 10
Connecting the Satellite Receiver
You should only connect your satellite receiver to the mains once all other cable
connections have been made. This will avoid any accidental damage to the satellite
receiver or any external devices.
A Connect the LNB of the satellite antenna to the LNB Input (12) of your satellite receiver.*
B Connect the TV set (or beamer) to the HDMI connector (15) of your satellite receiver (see next
chapter – HDMI Connection).
C If your TV set (or beamer) does not feature an HDMI port, you can use the TV SCART (19)
terminal to connect it to the satellite receiver.
D Furthermore, you can connect your TV set (or beamer) to the S-VIDEO (17) or Video output (16)
of your satellite receiver.
E You can use the VCR-SCART (20) output of your satellite receiver to connect a VCR or DVD
recorder.
F In order to obtain good sound quality, you can use the AUDIO L/R stereo outputs (18) of your
satellite receiver to connect an external Hifi amplifier.
G If your amplifier features a coaxial or optical SPDIF connector, you can use the coaxial S/PDIF
(13) or optical S/PDIF (14) terminal to connect it to the satellite receiver.
H Connect the power cord (21) to a wall outlet and turn the power switch (22) to position ON after
you have finished connecting all cables.
*If you want to use the device with satellite systems capable of receiving more than one satellite, a
DiSEqC
®
LNB must be used instead of a universal LNB.
HDMI Connection
Use an HDMI cable to connect your satellite receiver to the TV set. This connection type guarantees
an optimum and loss-free transmission of the video and audio signals to the TV Set. As soon as a TV
set is connected to the satellite receiver using an HDMI cable, your satellite receiver will toggle
automatically to the HDMI signal output. Next enable the corresponding HDMI input on your TV. See
the User's Manual for your TV set.
You can use the satellite receiver menus to optimise the screen resolution for HDMI mode. You can
choose from the following resolutions: 576i DVI, 576p DVI, 576i, 576p, 720p and 1080i. For optimum
resolution on a modern flat-screen display we recommend using the 1080i or 576i setting. Please
note that the picture may disappear when switching the resolution. If the picture remains blank, the
resolution you have set is probably not supported by your TV. In this case, use a SCART cable to
connect your satellite receiver to the TV set in order to gain access to the menus again.
Video and Audio Signal Connection:
All required settings can be found in the section Edit Settings | Signal Output (see page 23).