Silvercrest SSM 175 A1, Operating Instructions Manual

Page: 6 / 78

4
GB
Instructions for safe operation
• This device must not be used by children.
• Children should not be allowed to play with the device.
• The device and the power cable must be kept away from children.
• This device can be used by people with restricted physical, sensory
or intellectual abilities or people without adequate experience
and/or understanding if they are supervised or instructed on how
to use this device safely and if they are aware of the resulting risks.
• Disconnect the mains plug from the wall socket …
… when it is not supervised,
… before you assemble or disassemble the device, and
… before you clean the device.
• Clean the blade assembly and the blender jugs with warm water
and a little detergent.
DANGER for children
• Packing materials are not children's
toys. Children should not be allowed to
play with the plastic bags. There is a
risk of suffocation.
• Please ensure that children are not able
to pull the device down from the work
surface with the power cable.
• Keep the device out of the reach of chil-
dren.
DANGER! Risk of electric
shock due to moisture
• The device must never be operated in
the vicinity of a bathtub, a shower, a
filled hand basin or similar.
• The motor unit, the housing, the power
cable and the mains plug must not be
immersed in water or other liquids.
• Protect the motor unit and housing from
dampness and dripping or splashing
water.
• If liquid gets into the motor unit or hous-
ing, remove the mains plug immediately.
Have the device checked before reusing.
• Never touch the device with wet hands.
• If the device falls into water, disconnect
the mains plug immediately. Only then
is it safe to retrieve the device.
DANGER! Risk of electric
shock
• Only plug the mains plug into the wall
socket after the device has been com-
pletely assembled.
• Only connect the mains plug to a prop-
erly installed and easily accessible wall
socket whose voltage corresponds to
the specifications on the rating plate.
The wall socket must continue to be eas-
ily accessible after the device is
plugged in.
• Ensure that the power cable cannot be
damaged by sharp edges or hot points.
Do not wrap the power cable around
the device.
• The device is not fully disconnected from
the power supply, even after it is
switched off. In order to fully disconnect
it, pull out the mains plug.
• When using the device, ensure that the
power cable cannot be trapped or
crushed.
__RP86511_B4.book Seite 4 Montag, 9. Dezember 2013 10:14 10