Silvercrest SSJ 150 A1, Operating Instructions Manual

Page: 89 / 125

GB │ MT │ 85 ■ SSJ 150 A1
NOTE
► If fruit/vegetable pieces get stuck in the feed tube and cannot be freed
with the pusher , proceed as follows:
–
Switch off the appliance immediately and pull the plug on the power
cable
out of the socket.
–
Turn the housing lid anticlockwise until the marking points
towards the marking on the sieve tray holder and clicks firmly
into place.
–
Remove the housing lid .
–
Remove the fruit or vegetable pieces causing the blockage.
–
Reassemble the appliance and continue with juice extraction.
SAFETY CUT-OUT / RESET FUNCTION
► If fruit pieces get stuck and the appliance turns itself off automatically, this
means that the safety cut-out has tripped. The appliance switches itself off
before the motor can be damaged by overheating. The appliance cannot
be switched back on until you reset the safety cut-out.
Proceed as follows to be able to use the appliance again.
–
Set the on/off switch into the "O" position and pull the plug on the
power cable out of the socket. Allow the appliance to cool down
for 10–15 minutes.
–
Turn the housing lid anticlockwise until the marking points
towards the marking on the sieve tray holder and clicks firmly
into place.
–
Remove the housing lid .
–
Remove the fruit or vegetable pieces causing the blockage.
–
Carefully remove the sieve tray and turn the appliance
base over.
–
Press the "reset" button on the underside of the appliance base .
–
Reassemble the appliance and continue with juice extraction.