SSBS 3.0 A
2
US-EN
│
15
■
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules . Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation .
CAUTION: Changes or modifications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment .
NOTE: This equipment has been tested and found to comply
with the limits for Class B digital devices, pursuant to part 15 of
the FCC rules . These limits are designed to provide reasonable
protection against harmful interference in a residential instal-
lation . This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications . However, there is no guarantee that interfer-
ence will not occur in a particular installation . If this equipment
does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna .
- Increase the separation between the equipment and the
receiver .
- Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected .
- Consult the dealer or an experienced radio/TV technician
for help .
SSBS3.0A2
21.10.2020 12:05:55
