Silvercrest SRR 3.7 A1, Operating Instructions Manual

Page: 15 / 105

SRR 3.7 A1
GB
│
11 ■
7) Clean the shaver after every use with the supplied brush
0
.
For a more thorough cleaning, read the section “Cleaning and
care”.
Shaving using the mains adapter
CAUTION! MATERIAL DAMAGE!
► This appliance is not suitable for wet shaving!
If you want to use the shaver to load without charging it, you can
also use it directly with the mains adapter
.
:
1) Plug the connection plug
!
into the charging socket
3
on the
shaver.
Ensure the +/- terminals are correctly aligned. The guide rod
in the charging socket
3
must be in the guide groove on the
connection plug
!
. Otherwise the connection plug
!
cannot
be plugged in.
2) Insert the plug into a mains power socket.
Now you can use the shaver.
Trimmer/long hair trimmer
To shape your beard, form sideburns or shave eyebrows, use the
trimmer unit
.
1) Pull the shaver unit off the handset (if attached).
2) Attach the trimmer unit to the drive shaft . Depending on
whether you want to use the broad or narrow long hair
trimmer , change the direction of attachment.