SilverCrest SRD 600 B1
English - 15
8.1.2 Thorough cleaning process
Thorough cleaning must be performed following approx. 30 minutes of operation. If the Cleaning
symbol [7] lights up, it is time for thorough cleaning to be performed. Proceed as follows to change the
ear cushions:
Remove the protective cover.
Press the unlock button [2] in order to open the cutter system.
CAUTION!
The cutter system [1]
cannot be removed.
Clean the inside of the cutter system [1] and the collection chamber under running water.
Wait until the cutter system [1] and the collection chamber are dry.
Fold in the cutter system [1] until you hear it click into place.
Place the protective cover [1] back on the cutter system. Ensure that the wide tab of the protective
cover is aligned above the unlock button [2].
8.2 Maintenance
The shaver heads must be replaced after approx. 75 hours of operation. If the Replace shaver heads [6]
symbol lights up, it is time for them to be replaced.
The shaver heads are subject to wear and are not covered by the warranty. New shaver heads
can be ordered online from the following website: shop.targa.de
DANGER!
Disconnect the shaver from the mains prior to maintenance work, otherwise there is
a risk of electric shock!
DANGER!
Switch off the shaver prior to maintenance work in order to avoid hazards.
Proceed as follows to replace the shaver heads:
Remove the protective cover.
Press the unlock button [2] in order to open the cutter system.
CAUTION!
The cutter system [1]
cannot be removed.
