SilverCrest SRD 600 B1
English - 11
WARNING!
The shaver must not be exposed to excessive
temperature fluctuations, as otherwise condensation can
occur and lead to electrical short circuits.
WARNING!
Only use the mains adapter provided in order
to prevent damage to the shaver.
5. Copyright
All contents of these operating instructions are subject to copyright law and are provided to the user
solely as a source of information. Any form of copying or reproduction of data and information without
the express written permission of the author is prohibited. This also concerns commercial use of the
content and data. The text and illustrations correspond to the technical standards at the time of printing.
6. Before initial use
Remove the shaver and all the accessories from the packaging.
Check the shaver for signs of damage. If the shaver is damaged, it must not be put into operation.
The shaver can be operated using batteries or as a mains-powered device.
6.1
Charging the battery
Proceed as follows to charge the battery:
Connect the plug of the mains adapter to the charge connection [9] on the bottom of the shaver.
Insert the mains adapter into an easily accessible power socket. The charging indicator [4] will
indicate the charge level of the battery during the charging process. The charge level is shown as a
percentage from 0 to 100 in increments of 10.
Disconnect the mains adapter from the power socket and the shaver once the charging indicator [4]
reaches “100”. The battery is now fully charged.
