SLTR 70 A1 / SLTE 70 A1
■
30
│
GB
│
IE
Troubleshooting
If you cannot connect the speaker to a compatible external
Bluetooth
®
playback device, proceed as follows:
♦
Make sure that the
Bluetooth
®
function is activated on the external
playback device .
♦
Make sure that no 3 .5 mm jack cable
q
is connected to the
AUX input
6
on the speaker . When a device is connected via a 3 .5 mm jack cable
q
,
the
Bluetooth
®
function of the speaker is deactivated .
♦
Ensure that the speaker is switched on .
♦
If you use several external playback devices, ensure that any previously
made connection is disconnected . There may be a previously paired
playback device still within range .
♦
Make sure that the speaker is no more than 10 metres from the external
playback device and that no obstacles or electronic devices are placed
between them .
The following table helps to identify and rectify further possible faults:
Fault
Possible cause
Remedy
The device will
not switch on .
The internal battery
is empty .
Charge the internal battery (see
section
Charging the internal
battery
)
No sound .
The speaker is not
switched on .
Press and hold the
button
5
for about 2 seconds to switch the
speaker on .
The volume is set to
minimum .
Set the desired volume with the
/ button
2
. If necessary,
also increase the volume on the
external playback device .
The speaker is muted
in AUX mode .
Press the button
4
to unmute
the speaker .
The external play-
back device is muted
in AUX mode .
Unmute the external playback
device .
No sound .
The 3 .5 mm jack
cable
q
is not
correctly connected
in AUX mode .
Ensure that the 3 .5 mm jack
cable
q
is correctly connected to
the AUX input
6
on the speaker
and the external playback device .