GB
│
CY
│
9
■
SLS 3 A1
Long-hair trimmer attachment
If you do not want to completely shave off the hair or
merely want to trim your bikini line, use the long-hair
trimmer attachment
w
.
1) Push the long-hair trimmer attachment
w
onto the
shaver unit
2
and press it down so that the long-hair
trimmer attachment
w
clicks into place . Ensure that the
open grooves lie over the trimmer
1
.
2) Press the travel lock and push the on/off switch
5
in the direction of the shaver unit
2
. The appliance
starts .
3) Move the appliance with straight motions over the
skin . Apply repeatedly and guide the shaver against
the direction of hair growth .
4) After you have covered all the areas you want to
shave, push the on/off switch
5
back into its initial
position . The appliance stops .
5) Clean the long-hair trimmer attachment
w
with the
supplied cleaning brush
9
. For a more thorough
cleaning, read the section “Cleaning, care and
maintenance” .
Cleaning, care and maintenance
CAUTION! MATERIAL DAMAGE!
►
Do not use abrasive, chemical or caustic cleaning
agents to clean this appliance . This will irreparably
damage the appliance .
NOTE
►
As soon as the shave becomes noticeably worse, we
recommend replacing the shaver unit
2
.
To order a new shaver unit
2
, please contact the
service department (see section “Ordering replace-
ment parts”) . Have the IAN number of the item to
hand . You will find this on the front page of these
operating instructions or in the section “Service” .
Summary of Contents for SLS 3 A1
Page 3: ......