SilverCrest SLM 10 C1
46 - English
9.3 TWS mode
By purchasing a second speaker of the same type (SLM 10 C1), it is
possible to pair both speakers and use them as a stereo speaker system.
A second speaker can be purchased at www.lidl.de/de/onlineshop [in
German].
TWS
: ‘
T
rue
W
ireless
S
tereo’.
This function allows two speakers to be coupled.
The left speaker acts as the main speaker, which is connected
to a Bluetooth
®
device . It transmits the audio signals it
receives to the second (right) speaker.
9.3.1 Activate TWS mode
•
Switch on the speaker that should act as the main speaker. Establish
the Bluetooth
®
connection to your smartphone with this speaker.
•
Now, switch on the second speaker.
•
Press the (6) button on the main speaker. A beep will sound and
the TWS LED (11) will flash green rapidly for approximately 30
seconds, which indicates the speaker is in TWS pairing mode.
•
Now, briefly press the (6) button on the second speaker while
the TWS LED on the main speaker is still flashing green. A beep will
sound and the TWS LED (11) will flash green rapidly for
approximately 30 seconds, which indicates the speaker is in TWS
pairing mode.
Two speakers can only be paired with TWS pairing if TWS
pairing mode is activated on both speakers.
•
A beep indicates the coupling was successful. TWS mode is now
active. Playback will now occur through both speakers.
