SilverCrest SLM 10 C1
44 - English
9.2 Pair with a Bluetooth
®
device
The AUX IN socket (8) must not be used during the coupling
process.
The Bluetooth
®
device name of the speaker is
SLM 10 C1
.
Enter ‘0000’ if you are asked for a PIN during the pairing
process.
The connection may take a long time to establish, depending
on the device used.
•
Set your Bluetooth
®
device, such as your smartphone, to search for
available Bluetooth
®
devices nearby. Please consult the operating
instructions of your Bluetooth
®
device.
•
Briefly press the on/off button (1) to switch the speaker on. A
series of beeps will sound and then the power/charging LED (12)
will flash blue. Coupling mode is now active.
•
Select device
SLM 10 C1
from the list of found devices to pair the
two devices. A series of beeps will sound and the power/charging
LED (12) will light up blue twice once the connection is successful.
•
Now, start playback on your Bluetooth
®
device. Playback occurs via
the connected speaker, during which the power/charging LED (12)
slowly flashes blue.
•
Hold down the on/off button (1) for approximately 3 seconds to
end the Bluetooth
®
connection. A series of beeps will sound and the
power/charging LED (12) will switch off.
9.2.1 Connect speaker to another Bluetooth
®
device
To connect the currently connected speaker to another Bluetooth
®
device, the existing connection must first be disconnected by pressing the
