GB
│
IE
│
23
■
SLB 1.2 E3
Fault rectification
This section contains important information on fault localisation and
rectification. Observe the instructions in order to avoid risks and
damage.
Malfunction causes and remedies
CAUTION
The loudspeakers may not be opened!
►
There are no parts which can be cleaned or maintained inside
the device. Opening the loudspeakers will result in irreparable
damage to the device.
The following table will help with localising and remedying minor
malfunctions:
Defect
Possible cause
Rectification
No sound.
The volume control of
the player or the loud-
speaker is set to the
minimum volume.
Increase the volume
at the audio device or
the loudspeaker .
The audio device has
been muted.
Switch the audio
device muting off
again.
Audio device or
loudspeaker not
switched on.
Ensure that all devices
are switched on.
The 3.5 mm jack plug
is not fully inserted
into the audio device's
headphone socket.
Insert the 3.5 mm
jack plug fully into
the socket.
The 3.5 mm jack plug
of the headphones
is connected to the
headphone socket
.
Pull the 3.5 mm jack
plug of the head-
phones out of the
headphone socket
.
No sound or
volume too low
on connected
headphones.
The volume control
of the audio device
is set to the minimum
volume.
Increase the volume
at the audio device.
Headphones defective.
Check the head-
phone function on the
audio device itself.
NOTE
►
If the aforementioned solutions do not resolve the problem,
please contact Customer Service (see chapter
Service
).
Summary of Contents for SLB 1.2 E3
Page 3: ......
