Silvercrest SKWS 5 A1, Operating Instructions Manual, Page: 11 / 76

■ 8 │ GB SKWS 5 A1
Adding further items (tare function)
The tare function is useful if you wish to weigh the foodstuffs in a container but do
not wish to weigh the container itself.
■ Press the on/off button / zero button . Place the empty container on
the scales and press the on/off button / zero button again. The scales
indicate a weight of "
0
" grams again.
■ Depending on the weight of the container (initial weight) the function and the
symbol display on the kitchen scales changes.
Weight of container (initial weight) less than 200 g; the display shows
the symbol
NOTE
► As long as you can see the symbol on the scales you can weigh a further
5000 g.
■ Now place the amount to be weighed on the scales.
The weight of the items you have added will be shown on the display
.
■ Press the on/off button / zero button once. The scales indicate a
weight of "
0
" grams again.
■ As long as the weight of the added items does not exceed 200 g, the
symbol will be shown in the display and you can repeat the above two
steps as often as required (however, a total weight of 5000 g may not be
exceeded).
■ If the weight of the added items exceeds 200 g (e.g. 250 g of flour), the
display
shows the symbol .
■ Now place a further amount to be weighed on the scales. The weight of the
items you have added and the
symbol will be shown on the display .
■ Press the on/off button / zero button once and the overall weight of
the weighed partial quantities will be displayed. The weight of the container
is not included in the overall weight.
■ Press the on/off button / zero button once again. The scales will
again show "
0
" grams and the symbol. You can repeat these steps as
often as required (however, a total weight of 5000 g may not be exceeded).
Weight of container (initial weight) more than 200 g; the display shows
the symbol
■ Now place a further amount to be weighed on the scales.
The weight of the items you have added and the
symbol will be shown
on the display .