Silvercrest SKM 500 A1, Operating Instructions Manual

Page: 101 / 123

98
SKM 500 A1
GB
Mixing bowl with food processor
NOTE
► Use the diagrams on the fold-out page for assembly assistance!
1) Fit the drive shaft
i
to the shaft holder.
2) Place the mixing bowl
u
onto the motor block
o
so that the arrow is
pointing at the symbol and rotate the mixing bowl
u
until the arrow is
pointing at the symbol . The mixing bowl
u
is now fi xed.
3) Select a suitable disk 0 q w (see chapter “Working with the food proces-
sor”) and insert it into the disk adapter
e
:
–
if a diff erent disk is still installed: Press the metal tab of the disk outwards
so that it slides over the locking mechanism on the disk adapter
e . You
can now remove the disk.
–
Insert the new disk with the narrower side fi rst into the recess in the disk
adapter
e
and push the disk fi rmly downwards so that it engages and
is fi rmly seated.
4) Place the disk adapter
e
with the disk fi tted onto the drive shaft
i
.
5) Put the lid 3 onto the mixing bowl u so that the arrow on the lid 3 points
to the symbol on the mixing bowl
u
. Then rotate it until an audible
“click” is heard and the arrow is pointing to the symbol .
6) Slide the pusher
1
into the fi lling shaft
2
.
7) Insert the plug into the mains power socket.
Blender
NOTE
► Use the diagrams on the fold-out page for assembly assistance!
1) Place the blender onto the motor block
o
in a central position so that the
arrow on the holder with mixing knife 9 is pointing at the symbol .
2) Turn the blender until the arrow is pointing at the symbol .