GB
│
IE
│
33
■
SKHK 40 B1
♦
To terminate the
Bluetooth
®
connection, either disable the
Bluetooth
®
function on the
Bluetooth
®
playback device or
hold down the
Bluetooth
®
pairing button
7
for about
2 seconds until the operating/charging LED
0
flashes orange
and blue alternately. The headphones are now in pairing mode
again.
♦
Alternatively, switch the headphones off as described above
to deactivate the
Bluetooth
®
function.
NOTE
►
The next time you turn on the headphones, they will automat-
ically connect to the last
Bluetooth
®
playback device that
was connected. If your
Bluetooth
®
playback device does not
automatically reconnect to the headphones, you will have to
re-establish the connection manually. A detailed description of
how to do this can be found in the operating manual for your
Bluetooth
®
playback device.
►
If no
Bluetooth
®
connection can be made within 6 minutes,
pairing mode ends and the headphones switch off automatically.
►
Ensure that the headphones are no more than 10 metres away
from the
Bluetooth
®
playback device. Make sure that there
are no barriers or electronic devices placed between them.
►
As soon as you connect the
AUX IN
socket
8
to the audio
cable
e
, the
Bluetooth
®
function is deactivated and the
headphones change to AUX IN mode
. The
Bluetooth
®
function
can only be reactivated once you remove the audio cable
e
from the
AUX IN
socket
8
.
Music playback via
Bluetooth
®
The following music playback functions are only available when the
headphones and the playback device are connected to each other
via
Bluetooth
®
.
NOTE
►
It may be the case that not all functions will be supported de-
pending on the playback device used and its operating system.
