SKBA 2 A1
■
24
│
GB
│
IE
NOTE
►
The operating/charging LED
0
lights up orange during charging .
When the battery is fully charged, the operating/charging LED switches
off .
►
Charging takes about 3 .5 hours at a charging current of 500 mA .
When the battery is fully charged, you can play back music for about
20 hours at a medium volume in headphone mode or for up to 5 hours
in speaker mode . The playback time may vary depending on usage
(volume) .
►
When the battery is empty, you will hear two beeps at an interval of
two minutes, and the operating/charging LED
0
flashes three times or-
ange every 15 seconds . The headphones then switch off automatically .
Wearing the headphones
♦
When putting the headphones on, please note the side markings “R”
(right) and “L” (left) on the inside of the head band
1
.
♦
Adjust the headband
1
so that it fits your head comfortably and the
earpieces
e
+
r
cover your ears .
Pairing the headphones with a
Bluetooth
®
device
Before you can use the headphones with the
Bluetooth
®
function, you
must pair it with a compatible
Bluetooth
®
device .
♦
To switch on the headphones, press and hold the
button
5
until you hear a rising series of beeps and the operating/charging LED
0
lights up violet for 2 seconds . Afterwards, the operating/charging LED
flashes blue once every 3 seconds .
♦
Press and hold the
PAIRING
button
4
until the operating/charging LED
0
flashes alternately orange and blue to activate pairing mode .
♦
Set the
Bluetooth
®
playback device so that it scans for
Bluetooth
®
devices . A detailed description of how to do this can be found in the oper-
ating manual for your
Bluetooth
®
playback device .
♦
Select the entry
SKBA 2 A1
from the list of found devices on your
Bluetooth
®
playback device and, if required, enter the code
0000
to connect the two devices . If the pairing is successful, you will hear
a rising series of beeps and the operating/charging LED
0
flashes
blue twice at 3-second intervals .
