53
SKIP 3400 A1
GB
5) To switch the cooking area
1
off , press the button “On / Standby”
w
.
To switch all cooking areas
1 2 4
off at the same time, press the button
“On / Standby”
t
.
NOTICE
►
When all 3 cooking areas
1 2 4
are off , after usage or adjustment,
you must fi rst press the button "On / Standby"
t
to carry out new settings.
NOTICE
►
After switching on or off , an "- L" or a "- H -." appears in the display.
This heat indicator means:
–
"- L -" = "Low" - Temperature of the cooking areas
1 2 4
< 60°C
or
–
"- H -" = "High" - Temperature the cooking areas
1 2 4
> 60°C
NOTICE
►
After switching off , in the standby mode the fans of the appliance continue
to run on for some time, so as to dissipate the heat.
NOTICE
►
The appliance switches itself into the standby mode automatically after
120 minutes.
Safety switch off
■
For safety reasons, the cookware identifi cation automatically switches the
appliance off (in standby mode) when you ...
–
remove the cookware from the cooking areas
1 2 4
for longer than
15 seconds, or do not place anything there..
–
Although the energy fi eld is immediately switched off with short-term
cookware removals - the selected function remains, however, active.
Around every 3 seconds a signal tone issues a reminder that, in roughly
15 seconds, the appliance will switch itself off automatically. If you
replace the cookware back onto the cooking areas
1 2 4
within
15 seconds, the selected function will continue on the same settings.
NOTICE
►
As soon as you take the cookware from the cooking area, "- - -" blinks in the
display.
IB_75467_SIKP3400A1_LB5.indb Abs2:53
IB_75467_SIKP3400A1_LB5.indb Abs2:53
11.07.12 14:44
11.07.12 14:44
