Silvercrest SIKP 2000 B2, Operating Instructions Manual

Page: 13 / 87

11
SIKP 2000 B2
GB
Troubleshooting
PROBLEM POSSIBLE CAUSE
POSSIBLE SOLU-
TIONS
The appliance does not
function. The control lamp
“Power
4
does not glow.
The plug
2
is not connected.
Connect the appliance to a
mains power socket.
The appliance is damaged.
In this case, contact Custo-
mer Services.
The appliance does not
start the cooking process.
There is no cookware on the
cooking area
1
.
Place suitable cookware
on the cooking area
1
.
The cookware is not suitable
for induction cooking areas.
Use suitable cookware
(see chapter "Suitable
Cookware")
Shown in the display
8
is E01.
The appliance is not being
supplied with enough voltage
(< 160 V)..
Check and ensure that the
appliance is connected to
a properly installed mains
power socket with
220 - 240 V ~, 50 Hz.
Shown in the display
8
is E02.
The appliance is being sup-
plied with too much voltage
(> 270 V).
Check and ensure that the
appliance is connected to
a properly installed mains
power socket with
220 - 240 V ~, 50 Hz.
Shown in the display
8
is E03.
There is a short circuit inside
the appliance!
Immediately disconnect
the plug
2
from the mains
power socket and contact
the Customer Services
department!
Shown in the display
8
is E05.
The appliance is too hot (in
power levels mode)!
Disconnect the plug
2
from the mains power
socket and wait until the
appliance has cooled
down.
Shown in the display
8
is E06.
The temperature sensor under-
neath the cooking area
1
is
defective or there is a short
circuit..
Disconnect the plug
2
from the mains power
socket and contact the Cus-
tomer Services department.
Shown in the display
8
is E07.
The appliance is too hot
(in Temperature-Mode)!
Disconnect the plug
2
from the mains power
socket and wait until the
appliance has cooled
down.
IB_74434_SIKP2000B2_LB4.indb Abs2:11 IB_74434_SIKP2000B2_LB4.indb Abs2:11 10.05.12 14:10 10.05.12 14:10