12
SHBS 5 A1
GB
Beard trimmer attachment
NOTE
►
Comb the beard in the direction of growth to remove any knots.
►
Start by setting the comb attachment
12
to a longer length and reduce this in stages while
cutting the hair.
►
Please note that the corresponding cut length will only be achieved if the slide switch
2
is
set to position 3 and the appliance is being held at right angles to the skin surface.
♦
Cut the beard against the beard growth direction (upwards from chin to ear). Trim fi rst one
side and then other.
♦
Use the beard trimmer attachment
7
without the comb attachment
12
to cut the beard very
short or to add shape or trim a moustache.
♦
You can use the slide switch
2
to fi nely adjust the cut length in three steps.
Precision trimmer attachment
♦
Use the precision trimmer attachment
8
to add shape to a moustache, mutton chops, sideburns
or eyebrows.
♦
Lay the edge of the precision trimmer attachment
8
at the required level of the hair growth
and move the appliance downwards.
Ear/nose hair trimmer attachment
♦
Use the ear/nose hair trimmer
9
if you want to remove ear or nose hair.
♦
Guide the metal end of the ear/nose hair trimmer attachment
9
slowly into the nostril or ear.
♦
Move the appliance slowly in a circular motion to cut the hair.
Shaver attachment
♦
Use the shaver attachment
10
for a dry shave.
♦
Hold the appliance at right angles to the skin surface and move it gently over your face.
♦
Shave in the opposite direction to the beard growth. In complicated areas, such as the chin,
pull the skin tight to achieve a better result.
IB_96126_SHBS5A1_LB4.indb 12
IB_96126_SHBS5A1_LB4.indb 12
21.01.14 15:16
21.01.14 15:16
