Silvercrest SFW 350 C1, Operating Instructions Manual

Page: 10 / 116

7
GB
SFW 350 C1
Assembling the kubbe attachment
Unfold the fold-out side. There you will fi nd the step-by-step illustrations for as-
sembling the appliance.
1) Remove the meat grinder casing
5
as described under “Assembling the
meat grinder”.
2) Disassemble any attachments that might be fi tted and clean the meat grinder
casing 5 .
NOTICE
► For the kubbe attachment
e
, the cross blade
8
with the spring
7
is not
required! If need be, remove them both from the meat grinder casing
5
.
3) Coat all metal parts with cooking oil.
4) Insert the two plastic parts of the kubbe attachment e so that the fi xings on
the bottom kubbe attachment
e
ring are located in the openings in the meat
grinder casing
5
.
5) When everything has been attached correctly, screw the ring clamp 0 back
on hand-tight.
6) Assemble the meat grinder casing
5
as described under “Assembling the
meat grinder”.
Assembling the biscuit attachments
Unfold the fold-out side. There you will fi nd the step-by-step illustrations for as-
sembling the appliance.
1) Remove the meat grinder casing
5
as described under “Assembling the
meat grinder”.
2) Disassemble any attachments that might be fi tted and clean the meat grinder
casing
5
.
NOTICE
► For the biscuit attachment 1 , the cross blade 8 with the spring 7 is not
required! If need be, remove them both from the meat grinder casing
5
.
3) Coat all metal parts with cooking oil.
4) Pull the pattern strips
1
away from the front of the biscuit attachment
1
.
5) First place the plastic disc and then the metal disc of the biscuit attachment 1
into the meat grinder casing
5
(see fold-out side). Insert the biscuit attach-
ment
1
. so that the fi xings on the biscuit attachment
1
. are located in the
openings in the meat grinder casing
5
.
6) After everything has been correctly assembled, screw the ring clamp
0
back on hand-tight.
IB_96251_SFW350C1_LB4.indb 7 25.11.13 12:11