background image

10  GB/IE/NI

Cleaning  and  care / Storage / Disposal / Warranty / Service  centre

Preparing the product for use / Cleaning and care

 

 Note:

 The function display 

3

 ceases to illu-

minate.

Selecting the temperature:

   Just before using the foot warmer, set it to the 

highest temperature setting (setting 6). This will 
cause the foot warmer to warm up quickly.

   The foot warmer can of course be used at any 

time if it is switched off. Its teddy plush lining 
will warm your feet even if an electric socket is 
nowhere near.

 

When operat-

ing the foot warmer for several hours, 
we recommend setting the control 
unit 

2

 to the lowest temperature set-

ting to prevent overheating of the feet 
and subsequent potential skin burns.

   Temperature  levels

  

Set the required temperature level on the  
control unit 

2

.

Level 0:  

off

Level 1: 

minimum heat

Level 2–5:  customised heat
Level 6: 

maximum heat

  Automatic switch-off

Note:

 The foot warmer switches itself off automati-

cally after about 90 minutes. The function display 

3

 

then starts to flash.

 

 

Then select the setting 0 and after about  
5 seconds, reset the foot warmer to the desired 
temperature setting to switch it on again.

Note:  

Switch the foot warmer off (setting 0) and pull the 
mains plug out of the mains socket if the foot warmer 
is not to be used after it has switched off automati-
cally.

   Cleaning and care

  

 

DANGER TO 

LIFE BY ELECTRIC SHOCK! 

Al-

ways remove the power plug from 

the socket before cleaning the foot warmer. 
Otherwise there is a risk of electric shock.

  

Use a dry, lint-free cloth for control unit 

2

 

cleaning and care.

  

RISK OF DAMAGE TO THE 
PRODUCT OR PROPERTY! 

Never immerse the control unit 

2

 

in water or other liquids. It may otherwise be 
damaged.

  

Use a damp cloth and if necessary a little mild 
detergent to clean small stains on the foot 
warmer.

  

RISK OF DAMAGE TO THE 
PRODUCT OR PROPERTY! 

Do 

not use chemical cleaning or scour-

ing agents to clean the foot warmer and con-
trol 

2

. The foot warmer and control unit 

2

 

may otherwise be damaged.

  

RISK OF DAMAGE TO THE 
PRODUCT OR PROPERTY! 

Please note that the foot warmer 

must not be washed in a machine, dry-cleaned, 
wrung out, tumble-dried, mangled or ironed. 
The foot warmer may otherwise be damaged.

 

Do not wash.

  

Do not bleach. Do not use any 
cleaning agents containing bleach 
(such as heavy duty detergents).

  

Do not dry in a tumbler dryer.

  

Do not iron.

  

Do not dry-clean.

  

The removable teddy lining 

1

 can 

be washed by hand. Use a mild 

Summary of Contents for SFW 100 C4














Reviews: