GB
│
7
■
SFR 3.7 A2
■
To charge the appliance, connect the charger
0
to a mains socket and insert the connecting jack
.
into the charging socket
on the motor unit
.
The indicator light
lights up red. When the
appliance is fully charged, the indicator light
lights up green.
NOTE
►
Only recharge the batteries when the suction
power of the appliance is noticeably weaker
and the red indicator light
is flashing red.
Cleaning and care
DANGER – ELECTRIC SHOCK!
►
Prior to cleaning, disconnect the appliance
from the charger
0
! Risk of electric shock!
ATTENTION! DAMAGE TO PROPERTY!
►
Do not use abrasive or aggressive cleaning
materials. These could damage the surface
of the appliance!
Cleaning the spray bottle
■
Open the spray bottle and empty contents.
Remove the microfibre cover
6
.
Wipe the components of the spray bottle with
a damp cloth; if necessary, use a little mild deter-
gent on the cloth.
Washing the microfibre cover
The microfibre cover
6
can be machine-
washed at 60°C. Do not use any fabric
conditioner as this significantly reduces the
cleaning power of the microfibres.
Do not bleach the microfibre cover
6
!
Do not wring the microfibre cover
6
!
Do not tumble dry the microfibre cover
6
!
Do not iron the microfibre cover
6
!
Material ingredients:
70% Polyester / 30% Polyamide
Cleaning the appliance
For thorough cleaning, disassemble the appliance:
1) Press the ridged area on the underside of
vacuum attachment
and pull the vacuum
attachment
from the connecting piece
.
Clean the vacuum attachment
with a damp
cloth. If required, use some mild detergent on
the cloth.
2) Press the release buttons
and at the same
time pull the connecting piece
from the
motor unit
. Clean the connecting piece
with a damp cloth. If required, use some mild
detergent on the cloth.
3) Remove the dirt container
from the motor
unit
.
Turn the grey nozzle
at the top end of the
dirt container
slightly anticlockwise and lift
it off. Now you can pull the grey rod down-
wards out of the dirt container
. Rinse the
dirt container
with clear water and, if neces-
sary, with a mild detergent.
4) Wipe the motor block
off with a damp cloth.
If required, use some mild detergent on the
cloth. Dry the motor unit.
Summary of Contents for SFR 3.7 A2
Page 3: ...C B A ...
