Silvercrest SFA 4.1 C2, Operating Instructions And Safety Instructions

Page: 17 / 82

SilverCrest SFA 4.1 C2
English - 15
Charging the lithium-ion battery
Charge the lithium-ion battery fully before its first use. To do so, connect the USB connector of the supplied car charger
adapter to the USB charging port (7) of the hands-free kit. Then insert the car charger adapter into an appropriate
power outlet of your vehicle. The LED of the car charger adapter lights up green. The LED indicator (4) lights up
orange while charging. A full charge cycle takes approximately 3 hours. If charging is complete, the LED indicator (4)
goes out. Then disconnect the car charger adapter from the power outlet and the hands-free kit.
WARNING! Charge the battery only when the engine is running to save the battery of your vehicle.
Alternatively, you can also charge the battery via a PC or an external power supply. A connection cable and an
appropriate mini USB port are required for this purpose.
Switching on/off the hands-free kit
Press the multifunction button (2) for approx. 4 seconds until a beep sounds and the LED indicator (4) flashes blue. The
hands-free kit is now ready to use.
To switch off the hands-free kit, press the multifunction button (2) again for approx. 3 seconds. A beep sounds, the LED
indicator (4) flashes orange briefly several times and then goes out completely.