Silvercrest SEMM 1470 A2, Operating Instructions Manual

Page: 12 / 312

GB
│
IE
│
9 ■ SEMM 1470 A2
Before first use
1) Clean the sieve holder
p
, the measuring spoon
f
, the espresso sieves
s
d
, the drip grille
8
, the drip tray
7
, the tray for small cups
9
the milk
tank
6
, the milk tank lid
4
, the water tank lid
t
and the water tank
z
as described in the section “Cleaning and care”.
2) Place the appliance on a level and heat-resistant surface. Ensure that the
mains outlet is in easy reach.
3) Insert the drip tray
7
and place the drip grille
8
on it.
4) Insert the sieve holder p together with the espresso sieve ( s or d ) into the
appliance by inserting it at the “ ” marking on the appliance and then
turning it anticlockwise until the handle of the sieve holder p is pointing to
the “ ” symbol.
5) Insert the plug into a mains power socket.
NOTE
Remove the orange transport restraint from the bottom of the
water tank
z !
6) Before first use, proceed as follows to clean the internal pipes:
–
fill the water tank z with water (approx. 200 ml), and also the milk
tank
6
(approx. 100 ml).
–
Insert the water tank
z
and the milk tank
6
in the appliance.
–
Place a large cup on the drip grille
8
.
–
Set the milk nozzle
0
so that the milk nozzle
0
is pointing into the cup.
–
Switch the appliance on using the on/off switch i (position I). All the
control lamps begin to flash. As soon as all the lamps light up
permanently the appliance has heated up.
–
Press the “Large” cappuccino button
2
. Wait until water stops
coming out of the espresso outlet q and all control lamps light up
permanently. Repeat this process 2x.
–
Switch the appliance off using the on/off switch
i
(position O).
–
Empty the remaining water from the water tank z and the milk tank 6 .
NOTE
► You should also clean the appliance as described here after long periods
out of use.
The appliance is now ready for use.