SDK 2500 A1
■
16
│
GB│IE
CAUTION - RISK OF FIRE!
►
Never leave the appliance unattended while it is being used.
►
When the appliance is in use ensure that there are no easily inflammable
materials close to it (e.g. dishcloths, oven cloths etc.).
►
If you do not intend to use the appliance for an extended period, you
must disconnect it from the power source. The appliance is only com-
pletely without current when the power plug has been pulled out of
the socket.
Setting up and connecting
1) Place the appliance on a stable, level and heat-resistant surface.
2) Insert the plug into a mains power socket.
3) Switch the appliance on by switching the On/Off switch
to the position “I”.
4) Set the two thermostats
/
to MAX and allow the hobs
/
to heat up for
about 3 minutes without any pan on them.
This can cause slight smoke development since the protective coating which has
been applied will burn in. Ensure there is sufficient ventilation. For example, open
a window.
5) Switch off the hobs
/
after 3 minutes.
Energy-efficient cooking
■
Use cooking pots with the same diameter as the respective hob
/
. If you use
particularly small pots that do not cover the whole hob
/
, a great deal of
energy is simply wasted.
■
Ensure that the pots/pans rest flat on the hobs
/
. Dented or uneven bottoms
prevent optimum heat conduction.
■
To save energy, you can turn off the hob
/
before you have completely
finished cooking. The residual heat of the hob
/
is usually sufficient to finish
cooking the food.
Summary of Contents for SDK 2500 A1
Page 3: ......
