Silvercrest SDI 3500 D4, Operating Instructions Manual

Page: 19 / 192

SDI 3500 D4 ■ 16
│
GB │ IE
Troubleshooting
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTIONS
The appliance is
not working. The
On/Off indicator
lamp
0
does
not light up.
The plug is not connected.
Connect the appliance to a mains
power socket.
The appliance is damaged.
Contact the Customer Service
department.
The appliance
does not start
cooking.
There is no cooking vessel on the
respective induction field
1
/
3
.
Place a suitable pot/pan on the
respective induction field
1
/
3
.
The pot/pan is not suitable for
induction cookers. Use a suitable pot (see the "Suitable
cookware" section).
The child lock is activated
Hold down the
r
and
z
buttons for about 3 seconds.
"
(
" appears
on one of the
displays
t
.
There is no vessel on the respec-
tive induction field
1
/
3
or the
pot/pan is too small.
Place a suitable pot/pan on the
respective induction field
1
/
3
.
The pot/pan is not suitable for
induction cookers.
"
(
" appears
on one of the
displays
t
.
The temperature sensor under-
neath the induction field
1
/
3
is defective.
Disconnect the plug from the mains
power socket and contact the Cus-
tomer Service department. Enter the
error code.
" ( " appears
on one of the
displays
t
.
The appliance is being supplied
with excessively high voltage
(> 275 V).
Make sure that the appliance is
connected to a properly installed
mains power socket supplying
220–240 V ~, 50/60 Hz.
" ( " appears
on one of the
displays
t
.
The appliance is not being
supplied with enough voltage
(< 150 V).
Make sure that the appliance is
connected to a properly installed
mains power socket supplying
220–240 V ~, 50/60 Hz.
" ( " appears
on one of the
displays
t
.
The temperature sensor beneath
the induction field
1
/
3
is de-
fective or there is a short circuit.
Disconnect the plug from the mains
power socket and contact the Cus-
tomer Service department. Enter the
error code.
"
(
" appears
on one of the
displays
t
.
The electronics have overheated
Check to see whether the fans on
the bottom of the appliance are
working correctly and whether they
can take in a sufficient volume of air.
IB_374031_SDI3500D4_LB8.indb 16 24.09.2021 11:45:00