Silvercrest SDBS 2400 A1, Operating Instructions Manual

Page: 82 / 114

SDBS 2400 A1
GB│MT
│
79 ■
Vertical steam ironing
1) Hang the fabric to be ironed on a clothes hanger which is hung against
a heat-resistant surface.
2) Rotate the temperature control
2
to set the required ironing temperature.
The temperature control
2
must be set to a minimum of to produce
steam.
3) Wait until the heat-up indicator lamp
3
goes out.
4) Press the steam strength button
z
to set the required steam strength:
–
If the “max” steam indicator lamp
w
is lit up, a lot of steam will be
produced.
–
If the “eco” indicator lamp
q
is lit up, less steam will be produced.
As soon as the “eco”
q
or “max”
w
indicator lamps light up continuously
(depending on the setting) you can start steam ironing.
5) Hold the steam iron in a vertical position and press the steam button
1
.
6) Touch the fabric lightly with the sole of the iron
6
and steam it to remove
creases.
7) Release the steam button
1
to stop producing steam.
Refilling with water
1) Put the iron down on the base station placement area
5
.
2) Refill the water tank as described in the section “Filling the water tank”.