SDBR 420 A1
GB
│
IE
│
NI
│
CY
│
11
■
Before first use
1) Remove the iron from the packaging .
2) Remove all stickers and protective films from the iron and from the
sole of the iron
8
.
RISK OF SUFFOCATION!
►
Plastic bags may pose a risk . To avoid the risk of asphyxia-
tion, keep plastic bags out of the reach of toddlers and small
children .
3) Open the water tank filler opening
1
and fill the water tank with
water (See the section
Filling the water tank
) .
4) Set the correct voltage using the voltage switch
7
. You can, for
example, use a thin pin or a straightened paper clip to do this .
―
Slide the voltage switch
7
to the right to set a voltage of
220–240 V (e .g . for Europe/Switzerland) .
―
Slide the voltage switch
7
to the left to set a voltage of
100–127 V (e .g . for USA/Japan) .
5) Insert the plug into a mains power socket supplying the voltage
you have set .
6) Set the temperature control
4
to "MAX"
.
7) Heat the iron up for several minutes at the highest setting .
8)
If clicked in: press the steam switch
3
so that it releases
and protrudes beyond the appliance surface . Steam will
come out of the sole of the iron
8
continuously if you hold
the iron horizontally .
IB_296384_SDBR420A1_GB_CY.indb 11
11.12.17 14:44
