Silvercrest SDBK 2400 D3, Operating Instructions Manual

Page: 14 / 102

12 GB
10. Disposal
The symbol showing a
wheelie bin crossed through
indicates that the product re-
quires separate refuse collec-
tion in the European Union.
This applies to the product and all accesso-
ries marked with this symbol. Products iden-
tified with this symbol may not be discarded
with normal household waste, but must be
taken to a collection point for recycling elec-
tric and electronic appliances. Recycling
helps to reduce the consumption of raw ma-
terials and protect the environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.
11. Trouble-shooting
If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
~
Do not attempt to repair the device your-
self under any circumstances.
12. Technical
specifications
Subject to technical modification
Fault Possible causes/Action
No
function
• Connect the device to the
mains power supply.
• Use the temperature control-
ler 19 to turn up the temper-
ature.
Little or
no steam
• Fill the water tank 16 to at
least one quarter full.
• Switch on the steam flow
rate controller 5
( ).
• Run the self-cleaning cycle.
Steam
burst is
not work-
ing.
• Fill the water tank 16 to at
least one quarter full.
• Set the right temperature.
• Leave a pause of a few sec-
onds between steam bursts.
Spray
burst is
not work-
ing. • Fill the water tank 16 to at
least one quarter full.
• For the first spray burst, you
need to pump several times.
Model: SDBK 2400 D3
Mains voltage: 220-240 V ~50/60 Hz
Protection class: I
Power rating:
2,000 - 2,400 W
Fault Possible causes/Action
BB&3(B%ERRN6HLWH0LWWZRFK-XOL