GB
IE
7
SBT 3.0 A1
Disposal of packaging materials
The packaging protects the device from damage during carriage.
The packaging materials have been selected for their environmental
friendliness and ease of disposal, and are therefore recyclable.
Returning the packaging to the material cycle conserves raw
materials and reduces the amount of waste that is generated.
Dispose of packaging materials that are no longer needed in
accordance with applicable local regulations.
Inserting / replacing the batteries
♦
Open the battery compartment on the underside of the keyboard.
♦
Insert 2 x 1.5 V batteries (type AAA/Micro) into the battery compart-
ment (observe correct polarity).
♦
Close and secure the battery compartment.
NOTE
►
As soon as the indicator LED starts continuously fl ashing every
half-second, the batteries are almost depleted and must be replaced.
CAUTION
►
Always use batteries from the same manufacturer and of the same
type. Always replace both batteries at the same time.
Handling and operation
This section provides you with important information on handling and
using the device.
Switching the keyboard on and off
♦
Set the ON/OFF switch to the
ON
position to switch the keyboard
on and activate the
Bluetooth
®
function. The indicator LED lights
up for 2 seconds.
♦
Set the ON/OFF switch to the
OFF
position to switch the keyboard
off and deactivate the
Bluetooth
®
function.
IB_106974_SBT3.0A1_LB3.indb 7
07.01.15 09:30
Summary of Contents for SBT 3.0 A1
