30 GB
7.2 Changing the audio
device
1. If you want to connect the Bluetooth
speaker with a different audio device,
press and hold the On/Off button
1
,
until it blinks and an acoustic signal
sounds. The previous audio device is
now disconnected.
2. Switch on the new audio device and start
the Bluetooth connection. The audio de-
vice will now receive the device identifi-
cation "SBLS20A1".
3. Establish a connection to the Bluetooth
speaker on the audio device. Both de-
vices are now interconnected. The On/
Off button
1
lights up and an acous-
tic signal sounds.
7.3 Playing music using the
cable
NOTE:
if there is a device connected via a
cable, this connection has priority over the
Bluetooth connection. A possibly existing
Bluetooth connection will be interrupted.
1. Plug the TRS connector of a 3.5 mm stereo
jack cable (not included in scope of sup-
ply) into the headphone socket of the au-
dio device (e.g. MP3 player, telephone)
and the socket
AUX IN
4
on the device.
2. Switch on the audio device.
3. Press the On/Off button
1
to switch
on the device from standby mode.
4. Now play a song on the audio device.
The sound is reproduced via the loud-
speakers
2
.
5. Use the audio device to select and con-
trol the songs and to set the desired vol-
ume.
8. Cleaning and storing
DANGER! Risk of electric
shock!
Pull the power unit
6
out of the wall socket
before you clean the Bluetooth speaker.
Make sure that no liquid gets into the device.
• Clean the device with a slightly damp
cloth. Solvents, spirits, thinners etc. must
not be used, as they can damage the
surface of the device.
• When not using the device, store it in a
place where neither high temperatures
nor moisture can affect it.
9. Disposal
This product is subject to the
provisions of European Di-
rective 2012/19/EC. The
symbol showing a wheelie
bin crossed through indi-
cates that the product re-
quires separate refuse collection in the
European Union. This applies to the product
and all accessories marked with this symbol.
Products identified with this symbol may not
be discarded with normal household waste,
but have to be taken to a collection point for
recycling electric and electronic devices.
This disposal is free of charge. Protect the
environment and dispose of waste properly.
Further information can be obtained from
your local disposal service or city/municipal
administration.
Packaging
The packaging is made from recyclable ma-
terials. Dispose of the packaging sorted by
materials. When disposing of the packaging,
make sure you comply with the environmental
regulations applicable in your country.
BB58B%ERRN6HLWH0LWWZRFK0lU]
Summary of Contents for SBLS 20 A1
Page 36: ...BB58 B ERRN 6HLWH 0LWWZRFK 0lU ...
