Silvercrest NTK-2100, User Manual And Service Information

Page: 11 / 64

10
EN
After the driver has been installed you will now have four ports on the USB hub where you can connect any USB
device. In order to obtain the highest and most reliable data transfer rate, the USB hub must be connected directly
to the PC/notebook.
Please note that the total power consumption of all connected USB devices should not exceed 500 milliampere.
Numeric Keypad
Use
- Expanding a PC or a notebook with an external numeric keypad
- Length: approx. 76 cm
If your keyboard has no numeric keypad, you can use this add-on device to make numeric entries. Pull the numeric
keypad and connector simultaneously and carefully to make the connection cable the desired length. Please see
winding mechanism notes on page 4. If required, put the extension cable on the connector of the numeric keypad
in order to make the connector cable longer.
The numeric keypad is an active device which does not need manual driver installation under Microsoft
®
Windows
®
7, Windows Vista
®
, Windows
®
XP or Windows
®
2000. On first operation of the numeric keypad the corresponding
driver will be automatically installed (see page 3 - Procedure).
Some keys have a double assignment. To switch assignments press the "Num Lock" key at the top left on the
numeric keypad. When you enable Num Lock a control light shows and the numbers on the numeric keypad are
enabled. When you disable Num Lock, the control light goes out and the special functions are enabled.
Note:
You can use the numeric keypad to directly operate the Windows
®
operating system calculator. If you invoke
the programme Calculator and the Num Lock function on the numeric keypad is enabled, then you can use the
numbers and mathematical functions as a calculator.
Connector
cable
Num Lock control light