Silvercrest KH2306, Operating Instructions Manual

Page: 38 / 58

- 36 -
Setting FM stereo reception
• During FM reception press the button
STOP/ST./
MO
(
FM MODE ST.MO.
on the remote control) in order
to turn on the stereo playback. If the radio pro-
gramme is received at full strength in stereo, the
display
STEREO will be shown.
Note:
If the FM stereo signal is too weak, you might be
able to improve the reception by pressing the button
STOP/ST./MO
again. The display STEREO will be
extinguished. In this setting, the sound will be played
back in mono.
CD/MP3 Functions
• Press the button
CD/MP3
in order to switch to
Audio-/ MP3-Disc playback.
• The display briefly shows the message "Cd",
if no disc is inserted into the disc compartment,
NOd , will be displayed.
After approximately five seconds, the time is
displayed again.
• In order to switch between disc and time display
press the pushbutton
DISPLAY
.
Inserting a CD
1. Push down on the cover of the disc compartment
marked “ PUSH TO OPEN/CLOSE ” and quickly
release it. The flap of the CD compartment
opens upwards.
OP will be displayed.
2. Insert the CD into the centre of the CD compart-
ment with the printed side facing up. Please
ensure that the CD is perfectly centered on the
turntable.
3. To close the disc compartment, press down on
“ PUSH TO OPEN/CLOSE ” until it latches. After
a short flash „ - - -- “ on the display, the number
of titles on the CD is displayed. If a MP3 CD is
used, the additional message
MP3 will be
displayed.
Removing the CD
Push the button
STOP/ST./MO
(
STOP
on the remote
control) and wait until the CD stops turning.
Note:
The CD should no longer be spinning when you
open the CD compartment. It could be irreparably
damaged.
1. Push down on the cover of the disc compartment
marked “ PUSH TO OPEN/CLOSE ” and quickly
release it. The flap of the CD compartment
opens upwards.
OP will be displayed.
2. Remove the CD.
Playback functions
Starting playback
• Press the button
PLAY/PAUSE
. In the display is
shown and the first song is played. After that, the
actual title number is indicated.
Stopping the play function
Press the button
STOP/ST./MO
(
STOP
on the remote
control).
Interrupting/continuing playback
In the display the symbol and the title are flashing.
• To continue playback, press the button
PLAY/PAUSE
once again.
Next/previous title
• In order to play back one of the next CD's songs,
keep pressing the button
NEXT
( on the remote
control) until the number of the desired title appears.
IB_KH2306_AR23605_LB5 18.08.2008 16:21 Uhr Seite 36