Silvercrest KH 497, Operating Instructions Manual

Page: 4 / 49

- 2 -
Hand Blender Set
KH 497
Intendend Use
This hand blender set is intended exclusively for proces-
sing foodstuffs in small quantities. It is intendend
for domestic use only. This hand blender is not inten-
ded for commercial use.
Technical data
Mains voltage: 220-240V ~ /50Hz
Rated output: 300 W
Protection class: II
CO time: 1 Minute
CO Time
The C.O. Time (Continuous Operation) details how
long an appliance may be used without the motor
overheating and being damaged. Allow the applian-
ce to cool down for 2 minutes before switching it on
again.
Capacity
Measuring cup:
700 ml
Max. fill volume for fluids: 300 ml
Items supplied
Hand Blender set KH497
Measuring beaker
Whisk
Chopper (Blade & Bowl)
Wall bracket
2 x Dowels
2 x Screws
Operating instructions
Safety instructions
Risk of electic shock!
• Connect the blender only to correctly installed
mains power sockets supplying a power voltage
of 220 - 240 V ~ /50 Hz.
• Unplug the hand blender from the socket if you
notice any faulty operation and before cleaning it.
Under no circumstances may the motor unit be
immersed in liquids, or liquids be permitted to
permeate into the motor unit housing.
• Never subject the appliance to moisture and do
not use it outdoors.
• Should liquids nonetheless gain entry into the
appliance housing, immediately unplug the appliance
and arrange for it to be repaired by qualified
specialists.
• Never touch the hand blender, power cable or
plug with wet hands.
• To unplug the power cable, always grasp and-
pull the plug and do not pull the cable itself.
• Do not crease or crimp the power cable and place
the power cable in such a way as to prevent anyone
from stepping on or tripping over it.
• Arrange for defective power plugs and/or cables
to be replaced at once by qualified technicians or
our Customer Service Department.
• You may not open the motor unit housing of the
hand blender. Should you do so, appliance safety
can no longer be assured and the warranty becomes
void.
IB_KH497_37668_LB4 18.08.2009 15:54 Uhr Seite 2